The blue Prusa we built for the assembly guide blog has been working nicely for a while now. There is always room for improvement though so we’ve decided to showcase this little upgrade that has proved to aid in print quality on our other Prusas. Reasoning To obtain the best print quality, especially when your […]
Upgrading The Blue Prusa – How-To Guide Read More »
This is it! The final installment of our Prusa i3 MK3S+ build guide. All that’s left to do is plug in all the cables and run some calibrations and the 3D printer will be ready for action. A video version of the build guide is linked below on our YouTube channel. Many have trouble with
Prusa i3 MK3S+ Build Guide – Part 8 – Final! Read More »
If you’ve been following our Prusa build guide, no doubt you’ve been hanging on the edge of your seat waiting for our next installment. The long awaited wiring guide is now here. Use this guide in conjunction with your included Prusa MK3S+ guide to build yourself an nifty 3D printer. This installment only deals with
Prusa i3 MK3S+ Build Guide – Part 7 Read More »
Once in a while everyone who uses a 3D printer will be faced with a clogged nozzle. It’s frustrating when you come back to a finished print and the top of your model is missing but it is a pretty simple process to unclog and start again. Before going into the treatment, let’s touch on
Fixing A Clogged 3D Printer – The Cold Pull Read More »
Carrying on from last week’s guide to installing the LCD screen, we have the heated print bed and power supply unit (PSU). Though not quite as short as last weeks update, this one isn’t too taxing either. This is good because the wiring guide that follows can be a bit tedious experience so enjoy this!
Prusa i3 MK3S+ Build Guide – Part 6 Read More »
A nice short post on the Prusa i3 MK3S+ build guide. This weeks we’ll go through the simple process of installing the LCD screen onto the front of the 3D printer. Follow the pictorial guide in the gallery below to see what to do. Stay tuned next week for the sixth part of the build
Prusa i3 MK3S+ Build Guide – Part 5 Read More »
Building the extruder Welcome to part 4 of the Prusa build guide! This is a big one! It’s now time to assembly the business end of your machine. The extruder assembly is where the filament is melted and placed onto the print bed to become your 3D printed part. Luckily Prusa have wired up all
Prusa i3 MK3S+ Build Guide – Part 4 Read More »
Building the X and Z-axes Welcome to part 3 of the Prusa build guide! Because this is the fourth Prusa i3 in the Lannix3D workshop, we have reproduced some of the parts with a nice blue filament to distinguish this printer from the others. Prusas come from the factory with 3D printed parts, some of
Prusa i3 MK3S+ Build Guide – Part 3 Read More »
Building the Y-axis Moving on from the first post where we assembled the 3D printer’s main frame, it’s now time to build and install the Y-axis carriage. Incidentally, this is where I’ve noticed a difference between this MK3S+ and the earlier MK3S which is the brackets that hold the linear bearings to the underside of
February 2022 – Prusa i3 MK3S+ Build Guide – Part 2 Read More »
Building the main frame Prusa 3D printers are considered to be a reliable workhorse machine suitable for mass producing parts in a small business. Popular with hobbyists and businesses alike, we can vouch for their reliability and performance. This is our fourth Prusa machine and to distinguish it from the rest we have decide to
November 2021 – Prusa i3 MK3S+ Build Guide – Part 1 Read More »
