Skip to content
Lannix Design
  • Home
  • Projects
  • About Us
  • Contact
Lannix Design
  • Home
  • Projects
  • About Us
  • Contact

House Renovations – Part 3 – Bedrooms

Leave a Comment / DIY, Home, Lifestyle, Renovations / Nick

The bedrooms were the easy part of the renovations. We just had to remove the inner linings on the walls to the exterior of the house to install some insulation, put in the new built-in wardrobes and paint the walls. We suspected that the doorways would have breezeways above them, as many old Queensland homes […]

House Renovations – Part 3 – Bedrooms Read More »

House Renovations – Part 2 – Bathroom

Leave a Comment / DIY, Home, Lifestyle, Renovations / Nick

The bathroom was by far the most work of any part of the renovation, as is usually true for most whole house projects. The original bathroom was a hodge podge of add-on sections that were both poorly thought out and poorly executed. There was a toilet room inside the bathroom that just took up space

House Renovations – Part 2 – Bathroom Read More »

Upgrading The Blue Prusa – How-To Guide

Leave a Comment / 3D Printer, DIY, Guide, MK3S, mk3s+, Prusa, Upgrades / Nick

The blue Prusa we built for the assembly guide blog has been working nicely for a while now. There is always room for improvement though so we’ve decided to showcase this little upgrade that has proved to aid in print quality on our other Prusas. Reasoning To obtain the best print quality, especially when your

Upgrading The Blue Prusa – How-To Guide Read More »

House Renovations – Part 1 – Lounge & Kitchen

Leave a Comment / DIY, Home, Lifestyle, Renovations / Nick

As you may already know, we have recently bought a new house and consequently a new workshop/office for Lannix Design. During the past few months we have been busy renovating the house upstairs since we had three months left on the lease for our old place. I realise that renovations have little to do with

House Renovations – Part 1 – Lounge & Kitchen Read More »

End Table With 3D Printed Parts

Leave a Comment / 3D Printed, CAD, DIY, Featured, Home, Projects / Nick

Tripod End Table Project Sometimes you just need an end table. I can’t say that these small tables are a passion of mine. I’m not sure that anyone would say that. This one was designed and built out of a need that arose after my baby son arrived. But let’s not get into that. I

End Table With 3D Printed Parts Read More »

Guide To Creality CR-10 Thermistor Replacement

Leave a Comment / 3D Printer, CR10, Creality, DIY, Guide / Nick

The Creality CR10 V3 is used for larger parts that won’t fit on the 240 x 220 x 220mm print bed of our Prusas. Boasting a 300 x 300 x 400mm print volume, it was seen to be a reasonable solution for printing prototype parts for our upcoming sister business R-Spec. It seems that it

Guide To Creality CR-10 Thermistor Replacement Read More »

January 2022 – English Phone Booth

Leave a Comment / 3D Printed, CAD, DIY, Projects, Tools / Nick

My dad found one of these things second hand and thought it would be neat in his mancave. What does an English phone booth have to do with 3D printing I imagine you asking..?  Well dad’s is missing its crown and asked me if I could make some sort of template so he had a

January 2022 – English Phone Booth Read More »

← Previous 1 2 3

Our Company

  • About Us
  • Projects
  • Services
  • Privacy Policy

Social Media

  • YouTube
  • Instagram
  • Printables
  • Facebook
  • Pinterest
  • Linkedin

Contact Info

  • Contact Page
  • 3D Printing Quote
  • CAD Quote
Email

ABN 20 258 481 693

Copyright © 2025 Lannix Design