Workshop – Lannix Design https://lannixdesign.com.au Welcome To Lannix Design Sun, 04 Aug 2024 07:33:46 +0000 en-US hourly 1 https://wordpress.org/?v=6.6.1 https://lannixdesign.com.au/wp-content/uploads/2023/07/cropped-LD_Logo3-32x32.jpg Workshop – Lannix Design https://lannixdesign.com.au 32 32 Update: Fully CGI Shed Workshop Layout Design! https://lannixdesign.com.au/2024/03/27/update-fully-cgi-shed-workshop-layout-design/ https://lannixdesign.com.au/2024/03/27/update-fully-cgi-shed-workshop-layout-design/#respond Tue, 26 Mar 2024 21:30:42 +0000 https://lannixdesign.com.au/?p=5443

Since the relatively brand-new camera has succumbed to injuries sustained during an altercation with a coffee table, I had some time on my hands. I’d always had it in mind to make a 3D model of the shed and create a layout for the workshop in virtual space before laying down any cold hard cash for shelving, workbenches and/or materials to complete the job. So that’s what I’ve been working on the last few weeks.

As some of you may already know, I like to dabble in 3D animation using Blender and I’ve already used it to create the intro and transition sequences for my YouTube videos. This project has so far proved to be far more ambitious than I originally thought. The detailed shed model took about a week to recreate in virtual space and includes working roller doors and accurately represented colours using details from the manufacturer.

The shed model was just the start of it though. The opening sequence required houses, trees and other details around the yard to be modelled and, being a stickler for details, the materials needed to match their real-life counterparts as accurately as possible. Then, because I like to punish myself, the shed was animated to assemble itself while the camera was moving down the driveway and into the back yard.

A screenshot from the YouTube shorts preview I uploaded to my personal channel.

Click the image to see the video!

This entire sequence took around three weeks from the start of modelling until the twenty second clip was fully rendered. I’ve uploaded a low res preview version to my personal YouTube since I’m keen to get it out there. Click the image above to check it out.

The upside to having sunk all that time into creating accurate models is that they can be reused for subsequent clips, greatly reducing the time to set them up. The downside is that rendering clips in 4K resolution takes a long time. The opening sequence took three overnight sessions to render the 600 frames and it seems that subsequent sequences are taking even longer. I’ve taken measures to optimise the scenes for faster rendering times but I’ll need to get more serious about it if the video is going to be completed this year! It’s not surprising that companies like Pixar and Dreamworks have entire floors of buildings filled with computers dedicated to rendering animated clips.

Although I am happy with the quality of the rendered images, I realise there is room for improvement and I’m hoping to hone my craft for upcoming projects like the office under the house and my bar and games room layout. So subscribe to our main channel if you’re keen to see the end result of what I assume will be months of 3D modelling and rendering, you can see some progress pics in the gallery below.

Smell ya later!

Gallery - Fully CGI Shed Workshop Layout Design!

If you need more shed related content, check out the video below where I lay down an epoxy coating on the concrete floor! The lining and insulation video will be up as soon as it’s done and there’ll be more to follow as I’m working on setting out all the workbenches and tools virtually to hopefully find the optimal layout for the shed before forking over any cash!

See more of our work
]]>
https://lannixdesign.com.au/2024/03/27/update-fully-cgi-shed-workshop-layout-design/feed/ 0
Lannix Shop Is Now Open! https://lannixdesign.com.au/2024/01/24/lannix-shop-is-now-open/ https://lannixdesign.com.au/2024/01/24/lannix-shop-is-now-open/#comments Tue, 23 Jan 2024 21:30:25 +0000 https://lannixdesign.com.au/?p=5362

I’ve been working on our store website in the background for a long while now. It was to be a place to sell my 3D printed goods and any other items I came up with in the meantime.

Since moving house over a year ago, the 3D printers haven’t been set up for mass producing and they won’t be until the workshop under the house is finally finished.

You’ll know if you follow my blog that I’ve moved to creating content for YouTube as an outlet for my creative energy. 

Consequently, the shop will offer fabrication drawings produced in the process of creating the video content for YouTube. You’ll find the drawings are of a high standard and the price is very low in the hopes of getting people interested in my products. I produced fabrication drawings for a living in my previous career as a mechanical engineer and I hope that the quality reflects that.

The site is powered by WooCommerce and has the proven security and reliability that they have built on for many years. So please, if you want to support me and my family, take a look at the online store and check back in the future as the shop is continually updated!

Thanks so much!

Check out our first video of 2024! I’m working on continual improvement in my video production and I hope it shows. I’m particularly proud of this one.

Also, plans are available in our online store if you’d like to build a treasure chest like this for yourself or a loved one!

]]>
https://lannixdesign.com.au/2024/01/24/lannix-shop-is-now-open/feed/ 2
It’s Finally Built! – Shed Build – Part 3 https://lannixdesign.com.au/2023/09/06/its-finally-built-shed-build-part-3/ https://lannixdesign.com.au/2023/09/06/its-finally-built-shed-build-part-3/#respond Tue, 05 Sep 2023 21:30:52 +0000 https://lannixdesign.com.au/?p=4788

As regular visitors would know, I’ve been super keen to get the backyard shed built so we can finally move on with more renovations. I’m pleased to report that last week that it has finally happened!

This means that I’ve acquired enough footage to make a feature video for our YouTube channel. I’ve put a lot of effort into coming up with a compelling story to keep viewers interested while watching the cool timelapse videos I captured during the six-month build window.

If you watch the video and have some advice for me to make future videos more enjoyable, please let me know in the comments here or on YouTube. I’m aiming to make my videos as entertaining as I can and I’d appreciate your feedback!

Check out the link from our YouTube channel

Short version with just the shed build.

If you haven’t yet, check out our previous videos where we make the logo in Fusion 360 and then animate the logo in Blender. They’re both great tutorials for beginners in 3D modelling and animation.

]]>
https://lannixdesign.com.au/2023/09/06/its-finally-built-shed-build-part-3/feed/ 0
Shed Build – Part 2 https://lannixdesign.com.au/2023/04/26/shed-build-part-2/ https://lannixdesign.com.au/2023/04/26/shed-build-part-2/#respond Tue, 25 Apr 2023 21:30:13 +0000 https://lannixdesign.com.au/?p=3584
Formwork & Slab Pour

It all happened at once. It seemed that as soon as the old mango tree had been taken away as a pile of woodchips, we had the concreter coming to prepare the site for his formwork. 

If you’ve been following along, you’ll know that I’ve been keen to get the shed happening since we moved in to the new house in December of last year. Things had finally settled down in February after my partner Jade had gone back to work and I became a stay-at-home Dad to my son Emmet. 

Long story short, the slab was poured last week on the 20th of April and I’ve been capturing what I can with the new camera. I’ve uploaded a video to my personal YouTube account since I want to make a longer form video for the Lannix Design channel in the future. Please enjoy!

Finally, the slab is down!

]]>
https://lannixdesign.com.au/2023/04/26/shed-build-part-2/feed/ 0
Shed Build – Part 1 https://lannixdesign.com.au/2023/04/19/shed-build-part-1/ https://lannixdesign.com.au/2023/04/19/shed-build-part-1/#respond Tue, 18 Apr 2023 21:30:35 +0000 https://lannixdesign.com.au/?p=3571
Slab Preparation

The go-ahead was given to the shed builder in February of this year and we were told there’d be a six-month wait til it could be built. Apparently this is normal across the industry at this point for some reason. So much so that we had to go with the only company that actually got back to us with a quote. Luckily, that company, Titan Sheds, has been great to deal with so far.

I’ve been itching to see something happen with it for the last couple of months. A few weeks ago we had the tree lopper in to remove the old mango tree that unfortunately was in the way no matter where we built the shed. The stump left in the ground also had to be removed since the edge of the slab would run right through the centre of it. Aaron was nice enough to take out the large root system that was left as well since we didn’t want it to rot away and leave a void under the slab in the future.

At last, this week we had the concreter come in and prepare the back yard for pouring the concrete. The pour is planned for the 20th April which is tomorrow at the time of publishing.

So far I’ve shot some time-lapse videos of the progress and I’ll continue to do so as the build progresses. Once the shed is up I’ll make a feature video for our YouTube channel so stay tuned for that if you’re interested! For now, enjoy the timelapses and see you next week.

The result of the site preparation for pouring the slab.

]]>
https://lannixdesign.com.au/2023/04/19/shed-build-part-1/feed/ 0
New Workshop Update https://lannixdesign.com.au/2022/12/14/new-workshop-update/ https://lannixdesign.com.au/2022/12/14/new-workshop-update/#respond Tue, 13 Dec 2022 21:30:31 +0000 https://lannixdesign.com.au/?p=2961

The past three months have been super busy with the renovations to the new house and looking after our new baby. The business has been put on hold since it made more sense financially for me to be working on the house.

Now that the move has happened the new workshop is slated for some modifications and upgrades. Unfortunately, the workshop is now full of all the stuff we never knew we had and needs a whole lot of sorting…

In the meantime, we’ve setup a temporary space under the house to run a few 3D printers and I’m using the laptop in the living room to take care of business.

I’ve even stumbled across some problems with the renovations that could be solved using 3D printing. Stay tuned for updates on that next week.

This area under the house is slated for entertainment room & bar.

The future Lannix Design workshop. Currently a storage area for our excessive amount of belongings.

]]>
https://lannixdesign.com.au/2022/12/14/new-workshop-update/feed/ 0
Reusing Empty Filament Spools For Storage https://lannixdesign.com.au/2022/10/12/october-2022-reusing-empty-filament-spools-for-storage/ https://lannixdesign.com.au/2022/10/12/october-2022-reusing-empty-filament-spools-for-storage/#respond Tue, 11 Oct 2022 21:30:00 +0000 https://lannixdesign.com.au/?p=2713

The idea to reuse empty filament spools as parts storage isn’t new. When I first started 3D printing I recall seeing that people had made curved containers that fit within a spool and thought that was a nifty idea. I’d always thought I’d make one for myself once I had a few empty spools laying around so here we are.

Back in the day I was using Tecor filament that was quite cheap and not bad for the money. The Lannix Design 3D printing cabinet is full of custom made ducting parts that I designed and 3D printed to suit what was needed for filtration and dehumidifying. Long story short, I ended up with many empty spools that were the same size and just begging to be turned into something useful.

Design

I need to be able to visualise my projects before I start to make anything so I have something to reference. All parts of the organiser were modelled in CAD before a tool was picked up so that the end result could be seen and any changes could be made. 

The finished assembly, now used to house many tiny screws.

Since the major parts of the project were to be 3D printed, CAD modelling was completely necessary. One of the Tecor filament spools was measured with Vernier calipers for accuracy and 3D modelled which aided in creating parts that would fit around and inside it. I took the time to design a drilling template that would help to accurately install the parts containers when the time came which worked perfectly. I’m a big fan of these drilling templates and I’ve used them in all the projects I’ve done that require drilling.

A carry handle was designed to be 3D printed in the orientation that would produce the strongest part. This necessitated a three-piece assembly that screws to the top of the PVC pipe and includes the top handle (ring), the handle support and a press-fit top cover.

Gallery - Filament Spool Parts Organiser CAD Model

Building

The build was very straight-forward thanks to the time taken to model all parts and create the previously mentioned drilling templates. If you’d like to make one of these organisers for yourself I’ve outlined parts needed below and created a video guide for assembly that’s been uploaded to YouTube. The 3D models are available for download on Printables.com

Materials

The previously mentioned Tecor filament spools and the obvious 3D printing filament are needed to make the parts organiser. In addition to these, you’ll need a 72mm rotary (lazy Susan) bearing and a length of 60mm PVC pipe whose length will be determined by the number of spools you want to use.

Fasteners required are 8Gx20mm and 4Gx12mm timber screws. A small pack of each will be enough for the task.

The 3D models were printed with extra perimeters for strength and at a slower speed to give the best finish. Click the Printables logo below to download the models for 3D printing.

3D models are available for download on Printables.com.

Tools

Only basic tools are required including a drilling machine of some sort, a 3mm drill bit, a Philips screwdriver and something to cut your PVC pipe to length.

Assembly

The build process has been outlined in the linked YouTube video. It’s a very easy project if you’re interested in making one for yourself.

Take a look at the gallery below to see the finished product. It was assembled in one day once the parts had been 3D printed.

Gallery - Filament Spool Parts Organiser CAD Model

Conclusion

This project was designed to highlight the fact that it isn’t necessary to throw away your old filament spools to landfill. Although they are made of ABS plastic that can be recycled, reusing them is better than recycling in that no energy needs to be used to melt them down and mold them into something else. I’m hoping I can come up with more projects in the future that involve using parts that would otherwise be thrown away.

Until next week, ciao for now.

]]>
https://lannixdesign.com.au/2022/10/12/october-2022-reusing-empty-filament-spools-for-storage/feed/ 0
Lannix Design LED Sign Concept https://lannixdesign.com.au/2022/05/18/lannix-design-led-sign-concept/ https://lannixdesign.com.au/2022/05/18/lannix-design-led-sign-concept/#respond Tue, 17 May 2022 21:30:21 +0000 https://lannixdesign.com.au/?p=1854

I decided to build a sign for our workshop to show off our CAD skills and showcase a practical use for 3D printing. I first saw the concept in a YouTube clip and thought it looked like a fun project and it would spruce up the workshop wall.

The design consists of a black rear housing for each letter that will contain LED strips. A white 3D printed face plate is then attached which is semi-opaque, allowing light to radiate through. Examples of other people’s signs look amazing and I’m confident that this one will be too.

As of today, all of the lettering parts  have been 3D printed and now mounted to a backboard.  The next step is installing the LED strips which is proving impossible at the moment since they’ve gone missing in the couple of years since I bought them!

Subscribe to the monthly newsletter to see future updates on this or any of our other projects!

Video demo of the design concept stage

]]>
https://lannixdesign.com.au/2022/05/18/lannix-design-led-sign-concept/feed/ 0
August 2021 – More Enclosure Upgrades https://lannixdesign.com.au/2021/08/08/august-2021-more-enclosure-upgrades/ https://lannixdesign.com.au/2021/08/08/august-2021-more-enclosure-upgrades/#respond Sat, 07 Aug 2021 21:30:29 +0000 https://lannixdesign.com.au/?p=1467

Air filtration, heat and humidity management are an important part of maintaining high quality 3D prints. All through the year the humidity in Brisbane can be quite high so it’s important to control the climate in the workshop.

An air filtration unit has been installed in the enclosure and a dehumidifier is on its way which is designed to work in tandem with the filter.

The intention is to have an Arduino controller with a touchscreen that enables the three compartments in the enclosure to be filtered independently and shut off when not in use.  The touchscreen allows control of the blast gates shown in the picture gallery below to seal any section of the enclosure that isn’t in use. A temperature and humidity sensor in each compartment will assess the conditions and the Arduino will automatically route humid air through the dehumidifier/heater and filter.

Because of the unusual size of the blast gates, the ducting needed to be designed from scratch in CAD and 3D printed. The plus side of this is that everything fits perfectly and was able to be installed without issue.

One of the rear ducting pieces on the printer

Gallery - Bespoke parts for enclosure ducting

]]>
https://lannixdesign.com.au/2021/08/08/august-2021-more-enclosure-upgrades/feed/ 0
April 2021 – The Beginning https://lannixdesign.com.au/2021/04/10/april-2021-the-beginning/ https://lannixdesign.com.au/2021/04/10/april-2021-the-beginning/#respond Fri, 09 Apr 2021 21:30:03 +0000 https://lannixdesign.com.au/?p=1313

COVID 19 has affected us all in some way.  Lannix Design was created in response to the uncertainty that the pandemic has brought with it.  The business has been created as a way to turn what was a hobby into a real business.

3D printers can be temperamental and are affected by temperature and humidity fluctuations.  In order to make the end product more consistent and of a higher quality,  an enclosure is required to insulate the machines from these atmospheric changes.

Stage one of the enclosure’s implementation is now complete and has made a huge difference to print quality.  Check out some of the images below which include some 3D printed templates and brackets that aided in the construction of the enclosure.

Future additions to this project will include an air filtration system governed by a microcontroller.  This will allow the use of filaments which emit unpleasant fumes, which will be captured in activated carbon and HEPA filters.

Design concept – 3D printer enclosure/laser cutter bench

Gallery - 3D printed parts to make 3D printed parts!

See more of our work
]]>
https://lannixdesign.com.au/2021/04/10/april-2021-the-beginning/feed/ 0